How To Clean Lens On Epson Projector

Over time, the lens of your projector can accumulate dust. This creates a murky deject across your image, reducing both the brightness and the sharpness. Knowing how to clean a projector inside lens safely can make certain you're e'er getting the all-time image quality. Information technology will as well prevent the need for more than expensive repairs in the future.

The good news is, cleaning a projector lens isn't difficult. While you do have to exist careful not to damage or scratch the lens, it'southward a relatively quick and piece of cake maintenance job that tin can extend the life of both your lamp and your projector.

What you'll need:

• Compressed air
• Microfiber cloth
• Lens cleaning solution
• Tissue

Stride ane: Turn off the projector and unplug information technology from the wall.

If you lot've been using your projector recently, give it a few hours to cool. The lens gets very hot after use and this makes it more brittle. A cool lens will be less likely to intermission while cleaning it.

Stride two: Open the projector.

Every model is different, so look at your manual to detect out how to go inside. Unremarkably, there'southward a latch or button on the projector housing.

Step 3: Make clean the within of the projector with compressed air.

Use brusque bursts, holding the can roughly 3-four inches from your projector. Move the nozzle around to target dust you run into. Continue this around the fan and throughout the housing to eliminate all the dust from inside your projector.

Step 4: Remove all the grit.

You desire to make sure you're non only blowing the dust back into your projector. Wipe away whatsoever visible dirt or dust with a microfiber cloth before you introduce any moisture into the cleaning process.

Step 5: Clean the housing exterior.

A moistened material tin can remove any last traces of grit and dirt from the projector'due south case. Do this after you've cleaned the inside—dust sticks easily to moisture, and your projector can end up just equally dirty as it started. Pay special attention to the fan vent and surrounding area.

Stride 6: Clean the lens.

Now that everything's clean, you tin put the finishing touches on your lens. Remove the lens cap. Put a drop or 2 of the lens cleaner on a tissue and gently wipe the lens in a circular motion. The cleaner dries quickly, so there'due south no demand to dry it. Once you're finished, replace the lens cap.

Can a dusty lens be prevented?

Fifty-fifty the best-maintained projector needs to be cleaned periodically, simply in that location are a few easy steps you can take to reduce the corporeality of grit that gets into your projector.

• Keep the fan make clean. The fan is a necessary role of your projector's system, helping to alleviate the rut produced by the lamp. It's too the main reason grit ends up inside your projector, sucking in everything that'due south floating in your air. Check the vent every fourth dimension yous turn on your projector. If you run across accumulated dust, wipe it away with a damp cloth.
• Use an air purifier. The more particulates are in your air, the more than dust will terminate up in your projector. Positioning an air purifier close to the projector tin can serve as an extra line of defense, cleaning the air earlier information technology reaches the fan. (Some great options of air purifiers tin can be establish on Amazon)
• Comprehend the lens when you're not using information technology. Both the exterior and the inside of your lens can get dusty, but the outside is easier to protect. Replacing the lens cap when you lot're not using the projector too protects it from damage.

REFERENCES AND Farther READING:

• If y'all're looking for a gaming projector click here.
• Our top of the all-time 4K projectors tin be found here.

Source: https://projectortop.com/how-to-clean-projector-inside-lens/

Posted by: fordeliablive80.blogspot.com

Share this post